DIFFERENTIAL RING AND PINION FOR DANA 30 FRONT AND DANA 35 REAR - RING AND PINIONS INCLUDING TIMKEN BEARING KITS; 4.10/4.11 RATIO; REQUIRES 3.73 AND HIGHER FRONT CARRIER; REQUIRES 3.54 AND HIGHER REAR CARRIER; IF CURRENTLY USING A 3.54 RATI
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
Information:
JEEP YJ 1987-1996 DANA30F/DANA35R 4.10Application Summary:
| Year | Make/Model |
|---|---|
| 1987-1995 | Jeep Wrangler |
This item is a package with the following components:
| Attributes | |
| App/Model | Dana 30 Reverse, Dana 35 Standard |
| California Proposition 65 | WARNING: Cancer - www.P65Warnings.ca.gov |
| Country of Origin (Primary) | US |
| Cover Bolt Quantity | 10, 10 |
| Differential Carrier Break | 3.54 Ratio and Higher Rear (D35-411), 3.73 Ratio and Higher Front (D30-410F), 3.54 Ratio and Higher Rear (D35-411), 3.73 Ratio and Higher Front (D30-410F) |
| Differential Case Design Type | Dana 30 (D30-410F), Dana 35 (D35-411), Dana 35, Dana 30 |
| Emission Code | Legal US |
| Front Differential Carrier Break | 3.73 and Higher |
| Gear Ratio | 4.1, 4.11 |
| Harmonized Tariff Code (Schedule B) | 8708990011 |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| Model | Dana 30 Standard, Dana 35 Standard |
| NAFTA Preference Criterion Code | B |
| Pinion Gear Tooth Quantity | 10, 10 |
| Pinion Shaft Diameter | 1.375, 1.375 |
| Pinion Spline Count | 26, 26 |
| Position | Front and Rear |
| Ratio | 4.10 |
| Rear Differential Carrier Break | 3.54 and Higher |
| Ring & Pinion Gear Ratio | 4.10 Front (D30-410F), 4.11 Rear (D35-411) |
| Ring and Pinion Gear Ratio | 4.10 Front (D30-410F), 4.10 Front (D30-410F), 4.11 Rear (D35-411) |
| Ring Gear Bolt Quantity | 10 Front, 8 Rear, 10 Front (D30-410F), 8 Rear (D35-411) |
| Ring Gear Diameter | 7.125 Front (D30-410F), 7.125 Front (D30-410F), 7.5 Rear (D35-411) |
| Ring Gear Material | 8620 Steel, 8620 Steel |
| Ring Gear Outside Diameter | 7.125 Front (D30-410F), 7.5 Rear (D35-411) |
| Ring Gear Rotation | Reverse Front (D30-410F), Reverse Front (D30-410F), Standard Rear (D35-411), Reverse Front (D30-410F) |
| Ring Gear Tooth Quantity | 41, 41 |
| SDR Required Flag | N |
| Taxonomy | Differential LD |
| Taxonomy A | LD Differential, LD Differential |
| Taxonomy B | Ring and Pinion Gear Packages, Ring and Pinion Gear Packages |
| Taxonomy C | Front and Rear, Front and Rear |
| Taxonomy D | 4.10, 4.10 |
| GTIN | 00698231701928 |