Performance Oil Cooler, Fits Subaru BRZ/Toyota GR86 2022+, Thermostatic, Silver Cooler
and when you spend 20 minutes banging off the limiter and sliding sideways, airflow through the radiator is at a minimum, while heat buildup is at a maximum. The solution is a supplemental cooler whose only job is to cool the engine oil. Luckily, we’ve developed that solution.----This Mishimoto performance oil cooler kit for your 2022+ Subaru BRZ or Toyota GR86 adds a robust 19-row external oil cooler to the otherwise anemic stock system. This cooler takes the load off your engine coolant and adds 0.75 quarts of oil to the system for even greater cooling and lubricating performance. In thermostatic spec, this kit eliminates the liquid-to-liquid cooler, reducing failure points and allowing each system to operate completely independently for maximum performance. For dedicated race cars that need full cooling, right away, the non-thermostatic option retains the stock cooler to help get oil temps and viscosity in operating range fast.----Our direct-fit mounting bracket places the oil cooler front and center in the grille for maximum airflow, while the -10AN braided-steel lines ensure constant flow through the system. The included heat shielding sleeve adds another layer of protection against abrasion while keeping engine bay heat out of the oil.----This performance oil cooler kit includes everything you need for installation, so you can get your 2022+ BRZ or GR86 back on the street or track in no time. Like all Mishimoto products, this kit is backed by our Mishimoto Lifetime Warranty.
Application Summary:
Year |
Make/Model |
2022-2024 |
Subaru BRZ |
2022-2024 |
Toyota GR86 |
Attributes |
Country of Origin (Primary) |
CN |
GTIN |
00840197718766 |
Hazardous Material Code |
N |
Install Difficulty |
3 |
Life Cycle Status Code |
Available to Order |
NAFTA Preference Criterion Code |
B |
OptionLabel |
Thermostatic, Silver Cooler |
SDR Required Flag |
N |
SellingPoint01 |
Direct-fit for 2022+ Subaru BRZ and Toyota GR86 |
SellingPoint02 |
Robust 19-row external cooler adds significant cooling power |
SellingPoint03 |
Adds 0.75 quarts of oil to system for improved cooling and lubrication performance |
SellingPoint04 |
Thermostatic option eliminates stock cooler ensuring maximum performance |
SellingPoint05 |
Non-thermostatic option retains stock cooler for fast warmup at the track |
SellingPoint06 |
Durable steel bracket mounts cooler in grille for maximum airflow |
SellingPoint07 |
-10AN braided steel lines ensure ample, reliable flow |
SellingPoint08 |
Includes everything needed for installation |
SellingPoint09 |
Mishimoto Lifetime Warranty |
SellingPoint10 |
N/A |
SellingPoint11 |
N/A |
SellingPoint12 |
N/A |
SellingPoint13 |
N/A |
SellingPoint14 |
N/A |
SellingPoint15 |
N/A |
TechSpec Applications |
Toyota GR86 H4 2.4L 2022+--Subaru BRZ H4 2.4L 2022+ |
TechSpec Caution |
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. |
TechSpec Chassis Codes |
N/A |
TechSpec Core Construction |
Stacked-Plate |
TechSpec Core Height (in) |
5.43 |
TechSpec Core Length (in) |
11 |
TechSpec Core Thickness (in) |
1.97 |
TechSpec Engine Codes |
FA24D |
TechSpec Fluid Capacity (qts) |
0.75 |
TechSpec Includes |
(1) 19-Row Oil Cooler--(1) Oil Cooler Mounting Bracket--(1) Mounting Hardware Pack--(1) Sandwich Plate--(1) Center bolt--(2) -10AN Banjo Fittings--(2) Assembled AN hoses--(1) Heat Shielding Sleeve--(1) Mishimoto Lifetime Warranty |
TechSpec Inlet |
-10AN |
TechSpec Installation Notes |
N/A |
TechSpec Note |
N/A |
TechSpec Outlet |
-10AN |
TechSpec Overall Height (in) |
N/A |
TechSpec Overall Length (in) |
N/A |
TechSpec Overall Width (in) |
N/A |
TechSpec Rows |
19 |