-4AN Male to OE (Original Equipment) GM/Jeep/Mopar Master Cylinder & Clutch Release Bearings
The clutch system on most late-model vehicles use a plastic clutch hose that is tough to modify when doing an engine swap. The OE plastic hose can expand and many not work correctly in high heat, high pressure, or with a racing clutch. These special stainless steel adapter fittings works with most late-model master cylinders, hydraulic clutch release bearings, and slave cylinders. The plastic OE hose is eliminated and replaced w/ PTFE lined AN -4 hose (use Earls Speed-Flex hose). Use (2) adapters when using both the OE master cylinder and hydraulic release bearing (or slave cylinder). Use (1) adapter for custom clutch plumbing systems that use either OE master cylinder or OE clutch release bearing (or slave cylinder). Check your OE hose and choose an Early or Late style adapter. Sold Individually. Fits: Most 2009 & Prior GM Vehicles w/ Plastic Clutch Hose, and Most 2006 & Prior Jeep / Mopar Vehicles w/ Plastic Clutch Hose (also fits many other vehicles).
The clutch system on most late-model vehicles use a plastic clutch hose that is tough to modify when doing an engine swap. The OE plastic hose can expand and many not work correctly in high heat, high pressure, or with a racing clutch. These special stainless steel adapter fittings works with most late-model master cylinders, hydraulic clutch release bearings, and slave cylinders. The plastic OE hose is eliminated and replaced w/ PTFE lined AN -4 hose (use Earls Speed-Flex hose). Use (2) adapters when using both the OE master cylinder and hydraulic release bearing (or slave cylinder). Use (1) adapter for custom clutch plumbing systems that use either OE master cylinder or OE clutch release bearing (or slave cylinder). Check your OE hose and choose an Early or Late style adapter. Sold Individually. Fits: Most 2009 & Prior GM Vehicles w/ Plastic Clutch Hose, and Most 2006 & Prior Jeep / Mopar Vehicles w/ Plastic Clutch Hose (also fits many other vehicles).
- Fitting is Retained by Split-Pin
Information:
Use w/ AN 4 PTFE Lined Hose Suitable for High Pressure Applications (i.e. Earls Speed Flex or Similar Hose).| Attributes | |
| Adapter AN Size ( A ) | 4 AN MALE, 4 AN MALE |
| Adapter Type | Clutch, Clutch |
| Angle | Straight, Straight |
| Brand | Earls, Earl's |
| California Proposition 65 | No |
| Category | Air and Fuel Delivery |
| Country of Origin (Primary) | US |
| Emission Code | 1, 5 |
| Finish | Natural, Natural |
| Fitting Size | N/A |
| Fitting Type | Adapter |
| Harmonized Tariff Code (Schedule B) | 8409915085 |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| Material | Steel, Stainless Steel |
| NAFTA Preference Criterion Code | B |
| O-Ring Material | EPDM, EPDM |
| part type | Fuel Hose Fitting |
| Product Type | Clutch Adapter, Clutch Adapter |
| SDR Required Flag | N |
| Style | Mild steel, Threaded |
| Sub Category | Hardware, Fasteners and Fittings |
| Warning | California Proposition 65, California Proposition 65 |
| GTIN | 00090127023389 |