Complete Kit - Fits 2003-2007 Gen III Hemi Engine w/ 3/4"-16 Threads for Filter
The factory oil filter location on the Gen III Hemi may interfere with the crossmember or suspension in some engine swaps. These block-off plates & relocation kits allow the oil filter to be moved to a remote location. The block-off adapter screws on instead of the oil filter and the two 3/8" NPT ports on the block near the filter allow installation of the AN hoses for plumbing the remote filter. Aluminum construction with black anodized finish.
- Block-Off Adapter is Made from Aluminum w/ Black Anodized Finish – Attractive & Corrosion Resistant
Information:
Most 2003-2007 Gen III Hemi Engines Use Oil Filters w/ 3/4"-16 Threads - use HEMI0002ERL or HEMI0004ERL.
Most 2008-up Gen III Hemi Engines use Oil Filters w/ M22 x 1.5 Threads - Use HEMI0001ERL or HEMI0003ERL.
A remote oil filter must be plumbed to the two 3/8" NPT ports on the cylinder block near the factory oil filter (the bottom port on the engine block is the inlet & the upper port is the outlet).
The remote oil filter mount uses Fram PH-8 or HP-1 oil filter or equivalent.
Application Summary:
| Year |
Make/Model |
| 2005-2007 |
Chrysler 300 |
| 2007 |
Chrysler Aspen |
| 2006-2007 |
Dodge Charger |
| 2004-2007 |
Dodge Durango |
| 2005-2007 |
Dodge Magnum |
| 2003-2007 |
Dodge Ram 1500 |
| 2003-2007 |
Dodge Ram 2500 |
| 2003-2007 |
Dodge Ram 3500 |
| 2006-2007 |
Jeep Commander |
| 2005-2007 |
Jeep Grand Cherokee |
| Attributes |
| Brand |
Earl's |
| California Proposition 65 |
No |
| Category |
Engine |
| Center Stud Size |
3/4"-16, 3/4"-16 |
| Country of Origin (Primary) |
CN |
| Diameter |
3 in., 3 in. |
| Emission Code |
5, 5 |
| Finish |
Anodized Black, Anodized Black |
| GTIN |
00090127101827 |
| Harmonized Tariff Code (Schedule B) |
8409915085 |
| Hazardous Material Code |
N |
| Height |
1.000", 1.000" |
| Hose Length |
10 Feet, 10 Feet |
| Hose Size |
10 AN, 10 AN |
| Inner O-Ring Diameter |
1.380", 1.380" |
| Life Cycle Status Code |
Available to Order |
| Material |
6061 Aluminum |
| NAFTA Preference Criterion Code |
B |
| O-Ring Cross Section |
.139 Inches, .139 Inches |
| Outer O-Ring Diameter |
2.693", 2.693" |
| Outside Diameter |
3.000", 3.000" |
| Product Type |
Oil Filter Relocation Kit, Oil Filter Relocation Kit |
| SDR Required Flag |
N |
| Sub Category |
Filters |
| Wrench Size |
1-1/4, 1-1/4 |
| part type |
Engine Oil Filter Remote Mounting Kit |
