Speed-Flex Line 3 AN Female Swivel Straight To 3 Female Swivel 90 Hose Size 3 Length 28.
Our factory assembled hoses are made from the same SPEED-FLEX stainless steel braid protected hose of extruded PTFE that is the world standard of the racing industry for flexible brake, clutch and instrument hoses. Hoses are assembled with Earl''s SPEED-FLEX crimp or swaged permanently installed hose ends. Each hose is pressure tested to 4,000 psi.
  • Pressure Tested To 4000 PSI

Information:

We have independent test lab reports on file showing that prototype assemblies exceeded D.O.T. recommendations in all categories. The only continuing test program however, is a 4000 P.S.I. hydrostatic pressure test of every hose assembly that we make. We do not claim that any individual hose assembly is certifiable to D.O.T. standards, and we therefore must advise you that they are sold for off-road applications only. We make no claim of usability or suitability for highway or road use. PTFE brake hoses must be installed by an experienced professional mechanic. After installation each hose must be clean and free flowing. There must be no possibility that the installed hose assemblies can be stretched, crimped, or kinked under any conditions of wheel travel and steering angle. As with any hose installation, periodic inspection of hose condition is essential.
Attributes
ASIN B000M0JC3E
Brand Earls, Earl's
California Proposition 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Category Air and Fuel Delivery
Color Silver
Country of Origin (Primary) US
Emission Code 5, 5
Fluid Type Automatic Transmission Fluid, Bio-Fuels
Fluid Type Rating - Automatic Transmission Fluid 5 out of 5 Rating, 5 out of 5 Rating
Fluid Type Rating - Bio-Fuels 5 out of 5 Rating, 5 out of 5 Rating
Fluid Type Rating - Brake Fluid 5 out of 5 Rating, 5 out of 5 Rating
Fluid Type Rating - Coolant 5 out of 5 Rating, 5 out of 5 Rating
Fluid Type Rating - Diesel 5 out of 5 Rating, 5 out of 5 Rating
Fluid Type Rating - E85 5 out of 5 Rating, 5 out of 5 Rating
Fluid Type Rating - Methanol/Alcohol 5 out of 5 Rating, 5 out of 5 Rating
Fluid Type Rating - Oil 5 out of 5 Rating, 5 out of 5 Rating
Fluid Type Rating - Power Steering Fluid 5 out of 5 Rating, 5 out of 5 Rating
Fluid Type Rating - Pump Gas 5 out of 5 Rating, 5 out of 5 Rating
Fluid Type Rating - Race Gas 5 out of 5 Rating, 5 out of 5 Rating
Fluid Type Rating - Vacuum 1 out of 5 Rating, 1 out of 5 Rating
Harmonized Tariff Code (Schedule B) 8708300050
Hazardous Material Code N
Hose End #1 3 AN FEMALE, 3 AN FEMALE
Hose End #2 3 AN FEMALE 90 DEG, 3 AN FEMALE 90 DEG
Hose End Finish Electroless Nickel Plated, Electroless Nickel Plated
Hose End Material Steel, Steel
Hose Outer Material Stainless Steel Braided, Stainless Steel
Hose Size 3AN, 3 AN
Inside Diameter N/A, .120"-.143"
Inside Diameter (in.) N/A
Length 28.000 in., 28 In.
Life Cycle Status Code Available to Order
Material Braided Stainless Steel
Max Working PSI 2000 PSI, 2000 PSI
Min. Bend Radius 1.5", 1.5"
NAFTA Preference Criterion Code B
Outside Diameter N/A, .214"-.258"
Outside Diameter (in.) N/A
part type Fuel Hose
Product Length 28.000 in.
Product Type Hose Assembly, Hose Assembly
PTFE Wall Thickness .040 in., .040"
SDR Required Flag N
Size 3AN
Sub Category Fuel Storage
Submersible in Fuel Yes, Yes
Temperature Range -65⁰ to 450⁰ F, -65⁰ to 450⁰ F
Wall Thickness 0.430 in.
Warning California Proposition 65, California Proposition 65
GTIN 00021432170710

Write a review.

Note: HTML is not translated.
    Bad           Good